5
![]() |
||||
|
The largest Register
for
|
These 16 very rare Concorde manuals were produced in 1973. Each describes in detail both the structure and operations of a part of the Concorde or it's systems. They refer to the production level aircraft rather than the Prototypes. We have just one of each manual. They were targetted at the Pilots and Flight Engineers training to take Concorde into commercial service. There are 16 Manuals in total. These were used by a member of the Concorde "Nucleus" group of BA and BAC Pilots and Flight Engineers during the mid 70s. The manuals are in excellent used condition and now 30 years old. The occasional handwritten margin annotation or correction adds to their fascinating history as does the name of the flight crew member on the front. Each will come with a Certificate of Authenticity signed by Concorde Collectables and the Senior Engineering Officer who used these manuals and has taken care of them ever since. All sold except Section 20 |
|||
1 Introduction This short manual of around 20 pages divided into 3 sections plus large foldout pages showing the overall aircraft layout was published in 1973 and states that it contains details that relate primarily to the production level aircraft. It comes complete with an 'Errors, changes, and ommissions' notice dated April 1973. |
|
|||
|
Structure This manual of aprox 60 pages plus large colour foldout pages showing the details of the aircraft structure was published in 1973. It contains 8 main sections: (1) General Design (2) Materials (3) General Structural Principles (4) Wing (5) Fuselage (6) Fin & Rudder (7) Nacelles (8) Maintainability. It is amply illustrated with detailed engineering drawings throughout including a number of spot colour drawings. It comes complete with an 'Errors, changes, and ommissions' notice dated April 1973. |
![]() |
|||
|
Landing Gear This manual of aprox 28 pages showing the details of the aircraft landing gearwas published in 1973. It contains 6 main sections: (1) Introduction (2) Description (3) Operation (4) Main Wheels & Brakes (5) Nose Wheel Steering (6) Maintenace . It is amply illustrated with detailed engineering drawings throughout including a number of spot colour drawings. |
|
|||
Power Plant This manual of aprox 50 pages showing the details of the aircraft Rolls Royce Seneca 593engines was published in 1973. It contains 6 main sections: (1) Introduction (2) Airflow (3) Intakes (4) Engine & Exhaust (5) Starting (6) Fire Protection (7) Maintainability. It is amply illustrated with detailed engineering drawings throughout including a number of spot colour drawings and B&W photos. It comes complete with an 'Errors, changes, and ommissions' notice dated April 1973. |
![]() |
|||
Fuel System This manual of aprox 28 pages showing the details of the aircraft's fuel system was published in 1973. It contains 13 main sections: (1) General (2) Tank Arrangements, Fuel Usage, and CG Control (3) Fuel Internal Installations (4) Equipment (5) Cooling Duty(6) Engine Feed System (7) Main Tanks Transfer System (9) Tank Venting and Pressurization (10) De-Aeration Systems (11) Flight Deck Indication and Controls (12) Management Procedure (13) Maintainability. It is amply illustrated with detailed engineering drawings throughout including a number of spot colour drawings. |
![]() |
|||
Flight Deck Aprox 38 pages showing details of the aircraft's Flight Deck. It contains 13 main sections: (1) Introduction (2) Crew Seating Layout (3) Pilot's Vision (4) Flight Controls (5) Pilot's Instruments and Control Panels (6) Centre Console (7) Roof Panel (8) Side Consoles (9) 3rd Crew Members Panels (10) Lighting - Internal (11) Crew Services, Amenities, and Emergency Equipment (12) Circuit Breaker Panels (13) General Mainenance and Access Aspects. It is amply illustrated with detailed drawings and illustrations including many spot colour drawings including very detailed instrument layout. |
![]() |
|||
Flying Controls, Automatic Flight Control System, Air Data System This manual of aprox 60 pages showing the details of the aircraft's Flight Deck was published in 1973. It contains 20 main sections including (A1) General (A2) Description and Operations including Control Surface Operations, Power Flying Control Unit, Trim, and (A3) Flight Deck Management Control Panel. It is amply illustrated with detailed drawings and illustrations including many spot colour drawings including very detailed descriptions of flight deck controls and usage. It comes complete with an 'Errors, changes, and ommissions' notice dated April 1973. |
![]() |
|||
Hydraulics - Aprox 26 Pages It contains 5 main sections including (1) General (2) Description and and Green, Blue, and Yellow Systems (3) Installation (Pumps, Reservoir, Pipes, Filters) (4) Operation (Management Panel, and an optimistic section on Four Engine Failure. (5) Maintainability. It comes with an 'Errors, changes, and ommissions' notice dated April 1973. |
![]() |
|||