Test Era Parts

Made by General Electric. Dimensions: 6.5x5x5cm. Its weight is 195g aprox.Dated on April 1969. This is a test era part used in the flight development. We are unable to confirm whether or not this was used in the flight engineers panel or for test flight monitoring purposes only.
Larger image

Weight 235g aprox. Dimensions 3x7x7cm. A test era monitoring dial used for test flight evaluation. Not part of the cockpit of flight engineers panels.

Made by Phastron. Dimensions: 5X6.5X6.5cm and weight: 230g aprox. A test era monitoring dial used for test flight evaluation. Not part of the cockpit of flight engineers panels.
Large image

Made by Marion Electr. Instruments measures4x7x7cm and weighs 200g aprox. This was a piece of the test flight monitoring equipment from the test era and not a standard cockpit or flight engineers panel dial.
View large image

An original part from Concorde. This Roll Relais Jack Sensor was used on Concorde aircraft during the development program in the 60s and 70s. The item has Concorde Part/Ref number 66-266-315-00 The manufacturer's part number is 10232/1. The dimensions of this item in centimetres are approximately 12 x 18 x 15 and it weighs approximately 2Kg. This item is in fairly used condition.
More...

This Primary Heat Exchanger Outlet Temp. Sensor was used on Concorde aircraft during the development program in the 60s and 70s. When the wooden protector shown in the picture is removed the titanium probe is revealed. The item has Concorde Part/Ref number 66-367-195-00 The manufacturer's part number is A02 A218005A. The dimensions of this item in centimetres are approximately 16 x 8 x 8 and it weighs approximately 0.735Kg.This comes with an original dated equipment label, listing its details and some history. This item is in good condition.
See Larger Image

This Motorised Valve was used on Concorde aircraft during the development program in the 60s and 70s. The manufacturer's part number is A.977-J.B. The dimensions of this item in centimetres are approximately 11.5 x 14 x 14.5 and it weighs approximately 2.174Kg.The item is marked issue B, Mod R15. This item is in good used condition.
Click for Larger Image

This Dessicator was used on Concorde aircraft during the development program in the 60s and 70s. The dimensions of this item in centimetres are approximately 9 x 4.5 x 4.5 and it weighs approximately 0.5Kg.This item is a sealed container labelled "Not to be opened until required for use". We did however to take the picture!
See Larger Image

Fule Inlet Control Valve with contoured external flight surface. Used for refuelling. Made by Flight Refuelling Ltd. 1150230. Serial 112/49 CC P/N 66.301.562.00
See Larger Image

Lucas Aerospace Ltd. Serial 0049 Concorde P/N 66-264-454-00
Larger Image

Allied Signal Aerospace Equipment Systems P/N 21000482. Serial 123-266. CC P/N66.008.038.00

Distrs Thermal Control Co. Ltd TP38051 CC P/N 66-890-060-00

Ser. DRG 67 72 V

Hymatic. SAP.905.021. P/N 66.367.428.00

An original part from Concorde. This Ball Valve was used on Concorde aircraft during the development program in the 60s and 70s. This piece of equipment was made by Flight Refuelling Ltd. The item has the Concorde Part/Ref number 6630149400. The manufacturer's part number is 790304R Iss D. It measures approximately 25 x 15 x 13 and it weighs approximately 1.8Kg.This is a part of the Concorde refuelling equipment. Hi tech plumbing.
Larger image